Faux marble panels are specified for how they look, but they are rejected for how they were detailed. Veining direction, joint layout and edge treatment cause more site problems than the pattern itself.

Pattern, veining and panel size
Decide whether the veining runs continuously across joints or restarts per panel, and confirm cut sizes against the elevation before production.
- Approved sample or reference image
- Repeat and direction of veining
- Cut size, joint layout, trim allowance
Substrate, backing and edge treatment
Weight and fixing method drive both the backing specification and the installation sequence on site.
- Thickness, weight and substrate
- Framed, mitred or butt-jointed edges
- Fixing method and access for installation

Finish, labelling and packing
A feature wall is judged at arm’s length. Gloss variation and unlabelled parts are avoidable with a short checklist.
- Gloss level and protective coating
- Part numbers per elevation or room
- Crate, separators and corner protection
Frequently asked questions
Can we match a specific natural marble?
Usually yes, within the limits of the production method. Approval is always against a physical sample, since printed and screen representations differ.
How are panels labelled for installation?
Each part carries a number that maps to the elevation or room, so the installer can set out without sorting the whole crate on site.
Do you supply frames or trims?
Where the project calls for framed edges, the frame is part of the fabricated panel. Confirm this at the drawing stage so it appears in the quote.
Related reading
Working on a fit-out or renovation project and sourcing custom materials from China?
Send us your drawing package — we will review it and come back with a sourcing and QC plan.
www.wrm.cn · info@wrm.cn · WhatsApp +86 18688280345